National Breakout: Starting with a Big Gold Treasure Map

Chapter 336 M855A2

buzzing...

Soon, the whole factory seemed to be in motion.

On the production line surrounded by a circle outside, automated robotic arms began to operate in an orderly manner.

Their movements are precise and smooth, grabbing, shaping and assembling in one go, and each step is accompanied by subtle energy fluctuations and mechanical sounds.

On the transport track next to it, there are even small magnetic levitation vehicles flashing with faint green light, shuttling through it at lightning speed, efficiently transporting raw materials and semi-finished products.

A large screen on the exterior wall displays production data, processes and the factory's energy consumption in real time.

Data jumps and changes on the screen like flowing mercury, adding a strong technological atmosphere to the entire space.

In the area to Lin Yu's right, the screen even simulated a three-dimensional image of the M855A1, showing the virtual manufacturing process of the bullet from design blueprint to finished product.

"Ding—, new bullet blueprint saved, re-manufacturing success rate: 100%."

Bullet type: 5.56x45mm (unnamed)

Penetration level: 4

Bullet penetration: 43

Base Damage: 50

Armor Damage: 18.5

Bullet Introduction: (Not written)

Please name the new bullet!

"Success?" Lin Yu carefully checked the data and found that the penetration was increased by 3 points, the flesh damage was increased by 1 point, and the armor damage was also increased by 1 point!

"In this way, won't AR series guns stand out?" Lin Yu quickly sensed the huge market for this new bullet.

After all, Volkswagen has suffered from A1 for a long time. Once a suitable replacement appears, it will be a king bomb!

"Let's call you M855A2." Lin Yu entered the new name.

Introductory words...

Lin Yu quickly typed: "5.56x45mm, M855A2 bullet without the show"

A successfully manufactured bullet will not require any research and development costs for subsequent production. Lin Yu looked at the manufacturing cost of a bullet.

Single manufacturing cost: 50

Manufacturing rate: 2 pieces per day

"50, then how much should I sell it for? 300 should be about right." Lin Yu weighed it in his mind.

He compared other popular level 4 bombs.

7.62x39mm BP bullet, 450 per round

7.62x51mm M80 bullet, 350 per round

9x39毫米的SP6接近400，7N9则是420多。

Even the 5.8x42mm DVP88 bullet costs more than 400.

If I set the M855A2 to 350 rounds per round, won’t you explode?

AR series guns are inherently fast and stable. If their stats are maxed out and their bullets are better, they will have no shortcomings.

How about developing another one to increase the damage to HP?

No, the bullets of the same model are continuously strengthened, so the price of AR series guns will definitely increase.

There may not be more people buying by then.

Since we are targeting flesh wounds, we might as well strengthen the dumdum bullet.

Lin Yu thought for a while and decided to develop dumdum bullets with higher flesh damage.

In the past, the dumdum bullet was banned from development as it was considered too cruel.

But this is the Dark Zone, and wars in the Dark Zone are ultimately just a stream of data, with no real casualties. Furthermore, wars here are about the rise and fall of civilization.

Select bullet: 9x19mm dumdum bullet.

Penetration level: 0

Bullet penetration: 4

Base Damage: 74

Armor Damage: 1.2

Possible advanced directions:

Path A: Increased damage

Path B: Penetration Enhancement

Path C: Armor Break Enhancement

"Path A, enhanced physical damage!" Lin Yu clicked the confirm button repeatedly with ease, and first developed 100 rounds to test the waters.

pour--

Estimating renovation costs...

Renovation cost:

Current transformation success rate: 30%

The machine is ready, do you want to modify it?

"Why is the success rate so low?" Lin Yu frowned. It seems that improving the dum-dum bullet is not an easy task.

buzzing...

The machine started running, and two minutes later it showed failure.

All the R&D costs and bullet costs were wasted.

"I still don't believe it, come again!"

When Lin Yu tried to transform again, the success rate of the transformation was indeed improved.

Estimating renovation costs...

Renovation cost: 10

Current transformation success rate: 32%

The machine is ready, do you want to modify it?

"The cost of transformation has increased?" Lin Yu felt that the system was cheating him of his money, but he had no evidence!

But Lin Yu is not short of this now, and still chooses to transform.

After repeating this several times, the flesh wound enhancement modification of the dum-dum bullet was finally successful!

"Ding—, new bullet blueprint saved, success rate for re-manufacturing: 100%."

Bullet type: 9x19mm (unnamed)

Penetration level: 0

Bullet penetration: 4

Base Damage: 81

Armor Damage: 1.3

Bullet Introduction: (Not written)

Please name the new bullet!

"I'll call you 'Memme' and describe it as: 9x19mm Memme. It might hurt your feet a bit, so please bear with me."

"81 tank damage! Wow, that's really good." Although the tank damage value only increased by 4 points, it is a big improvement.

After all, the guns used for pedicures usually have a high rate of fire, so the enhancement of these 4 points of physical damage can be said to be very powerful!

"It cost me more than 500 million to develop it, so I have to sell it at a higher price." Lin Yu's face was gloomy, and he had the aura of a capitalist on his face.

Single manufacturing cost: 50

At this moment, the screen also displayed the manufacturing cost of a single piece, as if reminding Lin Yu to be more conscientious in pricing.

"The cost is 50, but the meat bomb is more than 100 per round, everyone will think it is too expensive." Lin Yu remembers that he was very stingy when buying P90 meat bombs in the past.

At its peak, the P90's bullet can fire nearly 200 rounds.

"Forget it, let's keep this one for our own use." After thinking it over, Lin Yu decided to use this bullet as a trump card.

From now on, only people from your own team can use it.

Of course, the people in your own team also have to spend money to purchase it!

"Since we can strengthen bullets, let's strengthen the M61 and M995 as well."

With the update and iteration of the version, Lin Yu also needs to upgrade his weapons and equipment.

After all, Carlos is wearing the seventh armor and sixth helmet. As his boss, how can I not exceed the standard?

Research and development!

Bullet type: 7.62x51mm M61

Penetration level: 6

Bullet penetration: 68

Base Damage: 65

Armor Damage: 37.4

Bullet introduction: 7.62x51mm M61 bullet, one of the standard specifications of armor-piercing bullets.

"As expected of the Bullet King, this attribute is impeccable."

Possible advanced directions:

Path A: Increased damage

Path B: Penetration Enhancement

Path C: Armor Break Enhancement

Path D: Comprehensive Upgrade

"Full upgrade?" Lin Yu clicked on the full upgrade and found that all the data of the bullets began to flash, and became a state that Lin Yu could change at will!

"System, what does this comprehensive upgrade mean? Why can I customize the parameters?"

"Ding—," the full upgrade is a time-consuming, fully automated R&D process that consumes a lot of Korn coins.

"The machine will automatically notify the host upon successful development. All properties of the developed bullets are determined in advance by the host."

"But it's best not to adjust the attributes too high, otherwise it will lead to problems such as a prolonged R&D cycle and an exponential increase in R&D funds."

"I see." Lin Yu compared the panel of the M61 and began to write down the properties of the M91 bullet in his mind.

First of all, since it is an M91, it shouldn’t be excessive for the penetration level to reach level seven, right?

The flesh wounds can't be too bad.

The armor must be washed off directly!