Military Industry: On the eve of the Anti-Eagle War, unlock the skills of a strong country

The dual 9A tank is the third generation model of this type of main battle tank, so its performance is naturally needless to say.

In terms of the firepower system, it can only be said to suppress some of the current tanks. It is equipped with a 125mm smoothbore gun that can carry complex types of ammunition and also has gun-launched missiles.

Such firepower.

Who can endure this nowadays?

Of course, those who can withstand it are not ordinary people. At that time, they are either in heaven or underground.

In addition, it also has an advanced fire control system, which adopts a downward-reflecting stabilized fire control system, which can keep each point of the image stable in a fixed position in the eyepiece at all times, making it convenient to complete aiming and launching.

It can be described as turning on the aiming hack. Once you are targeted, you will feel embarrassed.

I have to blast you.

If one is not enough, then use two.

It also has excellent protection capabilities. The main armor of the vehicle body is made of fully welded steel armor, with improved composite armor installed on the outside, and additional active defense explosive reactive armor is installed.

Based on my current level, can I say something bold?

Immune to all damage?

This is a bit exaggerated, but what Zhang Tian dares to say is that at present on Blue Star, there are really not many people who can penetrate armor.

Even in later times, only the weapons of the Eagle Sauce can pose a threat, but that is in later times.

Just focus on the present moment.

Ha ha.

There is also a new type of high-energy laser suppression system at the rear of the turret, which can interfere with incoming enemy anti-tank missiles, burn enemy tank sights or blind enemy infantry, and can also be used to defend against anti-tank armed helicopters.

Zhang Tian laughed when he saw this.

Who has these things now, such as anti-tank missiles?

The total weight is 55 tons, but the maneuverability is not bad. It has a 1500-horsepower engine, which is a twin-turbocharged engine, and the thrust-to-weight ratio can reach more than horsepower/ton.

Of these, I just want to ask if there is anyone else who can fight?

It seems not. If it can really be produced, does it mean that it is cheating?

This tank was later called the most deadly of the five new equipment, according to the Eagle Sauce.

It also ranks third in the world's top ten most powerful tanks, surpassing tanks such as the Russian T-90 and John Bull's "Challenger 2".

Zhang Tian looked at the tank pattern and smiled.

……

Fengtian May 1st Arsenal.

An anti-aircraft gun and some information were sent over and delivered to the May Day Factory.

There is only one command.

It means that mass production must be carried out quickly and the finished products must be delivered to coastal areas such as Shanghai.

Quietly give the bald man a big surprise.

Along with the anti-aircraft gun came a heavyweight.

It was Minister Wang who was in charge of their general assembly.

The purpose of coming here is very simple, which is to urge this anti-aircraft gun to go online as soon as possible and start production as soon as possible.

Then he asked Director Zhao to go to Guangzhou with him.

At the door, Director Zhao was a little surprised to see Minister Wang coming. He had not received any news that Minister Wang would come.

Minister Wang was in his fifties, with a majestic air on his weathered face. When he saw Director Zhao, he just nodded slightly.

"Commander, why are you here too?" Factory Director Zhao came up and asked in surprise.

"Xiao Zhao, quickly arrange your work and follow me to the Yangcheng Arsenal."

"Go to Yangcheng Arsenal?" Director Zhao was stunned for a moment when he heard this, then quickly nodded.

He has wanted to go for a long time.

Although the Fengtian May 1st Factory is very busy right now, making guns and cannons, none of these are developed by them.

They are all from the Yangcheng Arsenal.

The stuff was good and indeed excellent, but it also made Director Zhao feel a little depressed.

His factory also has a research and development department, so why can’t it develop some new equipment?

He also wanted to meet that magical character.

He really wanted to know who this monster named Zhang Tian was and why he was so smart.

Those weapons and equipment, one after another.

He trotted back to the factory, arranged the work, and then hurriedly got into Minister Wang's car.

The car slowly started moving and then drove towards the airport.

……

In the Yangcheng factory, the medium frequency furnace that had not been used for a long time was turned on again.

Zhang Tian and a few others were just standing there.

If you want to build a tank, you have to make it run, so you must build the engine first.

Otherwise, what's the point if you can't run.

You can't just push it.

This time it is intended to be used to make engine cylinder material.

Large engine components such as the cylinder block and cylinder head are usually made using a casting process, where molten metal is poured into a mold and processed after it cools and solidifies.

The key moving parts inside, such as the crankshaft, connecting rod, etc., are made by machine tools.

Zhang Tian now admires himself more and more.

Not everyone has this kind of foresight, so first improve the equipment and everything else so that everything can be done more conveniently.

Genius is often like this.

Qin Dongtian also put down his work on the diffusion furnace and came over to help Zhang Tian.

The fifteen people in the R&D department are also in place.

After assigning them some other tasks, Zhang Tian brought his people here.

Started manufacturing engine blocks.

First determine the size and shape of the cylinder, and then make a simple and crude mold.

It doesn’t matter whether it looks good or not, the key is that it is practical.

Someone brought the casting material over and put it into the furnace. This time the material was aluminum alloy.

This was also processed by Qin Dongtian first.

Half an hour later, the molten metal is injected into the mold, and then taken out after solidification, and the excess parts such as the gate, riser and flash produced during the molding process are removed.

This is not enough, the cylinder body must also be heat treated, such as annealing and quenching, to make it stronger.

Then, it’s time for precision machine tools to come into play.

Use machine tools to bore the cylinder, mill planes, and process the water and oil channels of the cylinder body to ensure that the dimensional accuracy, shape accuracy and surface roughness of the cylinder body meet the design requirements.

This is where the benefits of having precision machine tools come into play.

Just set the program, put the cylinder in, and you can get what you want in a few minutes.

The size and precision are very well controlled.

If you rub it with your hands, it will probably take at least ten days or half a month to do it.

I don’t know if it’s suitable yet.

Then comes the cleaning and testing of data.

After all the operations, Zhang Tian looked at the test data and smiled.

The result was no surprise.

This cylinder block is a failure. It has sufficient strength, but there are some problems with the structure inside.

Significant size deviation.

Zhang Tian frowned.

……

While Zhang Tian was busy here, Minister Wang had already arrived at the Yangcheng Military Region.

As soon as he came over, he found Minister Li and asked him to lead the way to find Zhang Tian.

Minister Li felt a little nervous when he learned that they were here to see Zhang Tian.

I thought to myself, maybe this kid has done something wrong.