Shenhao starts with bragging about paying taxes

It is very special that in the interior of the plant, whether it is the floor, the ceiling, or the walls, all look very high-end materials are used.

This kind of material is nothing at first glance, but as long as you observe carefully, you can still find something extraordinary, that is, it is completely non-reflective.

It should be known that this workshop is fully enclosed. In order to ensure sufficient lighting, almost 80.00% of the ceiling area is made into a light source, that is, a large number of high-brightness LEDs are installed.

Normally speaking, such an all-white working environment will definitely have reflections.

But within the reach of everyone, there is no reflection at all, which is a particularly strange feeling.

Wei Chao couldn't help but said in surprise: "Is this material called a low-light nanoplate?"

Lu Hui: "That's right, this is a new type of plate, and we have arranged with foreign manufacturers for a long time before shipping it over."

Everyone couldn't help being shocked.

Low-light nanoplate is a new type of composite material, and the domestic technology is not yet mature, so it can only be ordered from abroad.

Moreover, the board of this material is very expensive, and the money is calculated according to the square foot. Generally, enterprises only use it in a small range, such as for decorating laboratories.

It is really rare for Guanglan Electronics to install such expensive panels in the entire factory building, and even those big factories are reluctant to do so.

The key point is that even if the company is very rich, it is a huge project to order low-light nanoplates of this scale, and it is absolutely impossible to order without an order period of nearly one year.

Anyway, Guanglan Electronics is really wealthy enough.

Not only rich, but also connections.

Even Jiao Dagong, who didn't take it seriously just now, felt like he was speechless with his mouth wide open.

Guanglan Electronics doesn't seem to be short of money at all, but needs to attract investment.

Or is it that they are just strong outsiders and capable in the middle, and they want to achieve the ultimate in appearance?In order to better defraud investment?

Jiao Dagong glanced at Li Tianyu, and found that the young boss was whispering something to Xia Lei.

The two chatted quite speculatively,

In fact, this so-called low-light nanoplate is really difficult to manufacture. Even if you have money, the manufacturer's delivery is limited in time.

But that is difficult for ordinary people, but it is not difficult for Li Tianyu.

Lu Hui just mentioned this matter to Li Tianyu. If it is a chip, it needs better working conditions. The best decoration material inside the factory is the current new low-light nanoplate.

Lu Hui said that this kind of material board is very powerful, not only powerful, but also extremely durable.

There are two disadvantages.

The first one is expensive, extremely expensive.

Second, the yield is low.

Lu Hui said that at the time, but Li Tianyu took his heart and said to Lu Hui: "Since the nanoplate is so good, let's make it."

Lu Hui: "What? How? That needs to be ordered more than half a year in advance, and the output is low, which may not meet our needs for installation in the factory."

As soon as Li Tianyu heard it, he immediately made a decision: "Okay, leave this to me. You just need to sort out the specific material name, production company, and how much you need to sort it out and send it to me."

Lu Hui was shocked. He didn't expect Li Tianyu to speak so simply, as if he could go to the building materials market to buy it in the afternoon.

This is not plywood, let alone gypsum board, and it is not readily available when you buy it.

But Li Tianyu was the boss, and he was always reliable in his words, so Lu Hui couldn't help but still feel that there was such a glimmer of hope.

As for Li Tianyu, of course he will not fight uncertain battles now, let alone say outrageous words.

He has a bragging tax system as a foundation, and even got a lithography machine, so it's no problem to make some composite plates.

So after Lu Hui sent the information about the low-light nanoplates, Li Tianyu used the system to pay taxes to buy a large amount, which far exceeded the amount Lu Hui needed.

We all know that if you can't say well about decoration, you might make a wrong estimate.

It doesn't matter if you estimate too much, but you are afraid of underestimating.

Imported plates like this are not easy to buy, so it is better to order more at one time, so as not to be caught when they are not enough.

So in the end, it became like this. The low-light nanoplates in the Guanglan Electronics factory were flooded, and they were used where they should be used, and where they shouldn't be used.

Even so, there are still a lot of low-gloss nano-sheets left over, which are used in another new factory building, which is extremely luxurious.

Xia Lei: "Brother Li, this factory building is quite impressive. It seems that those big factories dare not do this. It's a bit like putting money on it directly."

Li Tianyu hurriedly smiled and said a few words modestly.

What are you kidding, this is much more expensive than posting money directly.

This low-gloss nano-sheet is indeed ridiculously expensive. The tax that Li Tianyu has to pay is almost 60 yuan, which is not cheaper than a machine with tens of millions, or even hundreds of millions of yuan.

However, the decoration of the factory building is just to look at it, the key is to look at the machinery and equipment itself.

At this time, Wei Chao, Jiao Dagong and the other four had already started looking at the machinery and equipment in the distance.

This factory building can accommodate three production lines. Although the equipment for manufacturing chips is larger than the equipment for the screen panel production line, it still looks a bit empty.

Now those machines and equipment have just been arranged, and there are no workers or employees busy on the production line, so the factory building looks a little deserted now.

From a distance, everyone saw that the machines and equipment were brand new, and some of them were even covered with transparent plastic films.

Wei Chao, Jiao Dagong, Liu Xingshan, and Hu Shaoming, four experts in chip technology, all looked straight at it for a while.

Some devices are identifiable even if they are not very close.

Liu Guangshan: "Group leader Wei, group leader Jiao, look! Is that a Nikon plasma etching machine over there?"

Wei Chao's tone was also full of consternation: "Indeed, looking at the configuration and size over there, it seems to be the latest model..."

Jiao Dagong: "No, it's impossible. It's very difficult to buy the latest model now. Could it be an old model?"

Wei Chao: "Impossible, impossible, the volume of the old model plasma etching machine is twice as big as that one."

Jiao Dagong was speechless for a moment.

What Wei Chao said was correct, and it is impossible for Jiao Dagong not to understand that just now was just the last struggle.

The Nikon plasma etching machine is only as expensive as the ASML lithography machine, and the world's first-class chip manufacturers will be willing to buy it.

In fact, like ASML's lithography machines, Nikon can produce more than 30 such machines throughout the year.

In other words, this also needs to be booked at least one year in advance, otherwise even if you have money, they will not be able to deliver the goods.

At this time, Hu Shaoming couldn't help but exclaimed, pointing not far away and said: "Is that Kuyard's ion single crystal furnace? There are actually two of them, and they are also the latest model!"

The more people looked at it, the more shocked they became, and the more shocked they looked.

Seeing this, Lu Hui said, "Let's go over there and see one after another."

Lu Hui's words were in line with the wishes of several technicians, and even Jiao Dagong became a little excited.

There are not many chip manufacturing companies in China, and most of them are relatively rich. It is not surprising to have one or two such advanced machines.

But if so many of the world's most advanced machines are concentrated in one enterprise, it would be a bit too much.

I'm afraid even the very professional SMIC can't do it. After all, SMIC's technical level has only just reached [-] nanometers.

However, Jiao Dagong still felt that it was impossible for this company to build a chip production line that was too impressive. After all, the core equipment was a lithography machine.

At present, ASML's lithography machine is the only one in the world that can produce high-tech chips. Other brands of lithography machines are much worse and can only produce low-key chips.

In other words, if you want to build an advanced chip manufacturing production line, ASML's lithography machine is an unavoidable hurdle.

But the current international environment is more complicated. Not to mention the latest ASML lithography machine, even the old model cannot enter the country.

Even if you have money, if you have money, if you don’t sell it, you have nothing to do.

So the only way to get an ASML lithography machine is to buy a second-hand one.

But second-hand ones are not easy to buy.

There are too few goods, even if a well-known large company has eliminated the old lithography machines and is willing to sell them, it will cost several hundred million soft sister coins.

Anyway, no matter what Jiao Dagong thinks, it is impossible for Guanglan Electronics to obtain the advanced ASML lithography machine.

At this time, everyone followed Lu Hui to one end of the production line, and began to check each machine one by one.

Speaking of chip manufacturing equipment, there are quite a few, such as plasma etching machines, reactive ion etching systems, ion implanters, single crystal furnaces, wafer dicing machines, and so on.

The more the four technicians watched, the more frightened they became, and the more they watched, the more excited they became.

Advanced, these machines are so advanced.

Even if Jiao Dagong intentionally or unintentionally wants to show contempt for Guanglan Electronics, there is no way to do it.

At this moment, Xia Lei didn't pay too much attention to those brand-new machines, but carefully looked at the expressions of Wei Chao, Jiao Dagong, Liu Xingshan, and Hu Shaoming.

After all, Xia Lei is not an expert. Even if he has a little knowledge of chip production, he can't see the specific conditions of the machinery and equipment. Therefore, the results can only be seen by observing the experts Xia Lei called over.

And the expressions of these four people made Xia Lei feel quite satisfied.

Not only that, but expectations were far exceeded.

Of course, Xia Lei still had to ask to confirm his own judgment.

When Li Tianyu went to explain the matter to Lu Hui, Xia Lei took the opportunity to communicate with the four technicians.

Xia Lei: "Jiao Dagong, Wei Chao, what do you think of the equipment in this production line? Can it produce high-standard chips?"

Xia Lei raised this question very skillfully, but he only said "high standard" chips, which is too vague.

The main reason is that Xia Lei doesn't know the situation well, and it's hard to elaborate too much.

In case the production line of Guanglan Electronics can only produce 28nm chips, Xia Lei insists on saying [-]nm, or even [-]nm, how embarrassing it will be for Li Tianyu to hear it!

Wouldn't it be embarrassing for a little-known medium-sized company in China to produce [-]nm or even [-]nm process chips!

Xia Lei has also been in the business world for many years. He is very good at dealing with people before and after, and he will definitely not do anything that would embarrass Li Tianyu.

After all, the relationship between Li Tianyu and Ai Baoquan is too close, and it is very important to maintain a good relationship with him.

After hearing Xia Lei's question, Wei Chao immediately responded: "President Xia, look now... Guanglan Electronics is too powerful, and all these equipment are top-notch!"

Xia Lei was taken aback. He knew that these devices would not be too low-key, but he didn't expect Wei Chao to speak of them as high-end.

Xia Lei: "Top? Top domestic?"

Wei Chao shook his head, with an excited look on his face: "It is the world's top, Mr. Xia, there is nothing better than these devices!"

This time even Xia Lei showed a look of astonishment, feeling a little unbelievable.

Guanglan Electronics, no, how did Li Tianyu put together these advanced machinery and equipment in such a short period of time?

Although Li Tianyu said that he had been preparing for a long time, but to be honest, Xia Lei didn't believe it at all.

How long is a long time?a year?two years?Or three years, four years?

How old was Li Tianyu at that time, could he predict the future and see the current international trend?

Xia Lei couldn't help shaking his head.

It doesn't make sense, it doesn't make sense at all!

At this time, Jiao Dagong said: "Mr. Xia, although the equipment we have seen now is indeed very advanced, but the most important thing has not yet been seen."

Of course Xia Lei understood what Jiao Dagong said.

Of course, it is the lithography system, which can be said to be the core equipment of chip manufacturing.

At this time, Li Tianyu and Lu Hui came over after communicating.

Xia Lei smiled and said, "Brother Li, the little brothers I brought here are all stunned by your Guanglan Electronics' equipment."

Li Tianyu quickly responded modestly: "That's really thanks to all the technical guys for your praise."

Wei Chao couldn't help giving a thumbs up: "President Li, this production line is definitely domestic, no, it's the top in the world, but we just want to see..."

Seeing Wei Chao hesitated to speak, Li Tianyu smiled and said, "Do you want to see the lithography machine?"

Wei Chao nodded.

Jiao Dagong: "Mr. Li, we are very curious, has Guanglan Electronics got a lithography machine?"

Li Tianyu nodded: "Of course I got it, otherwise I wouldn't say that the production line has been set up."

Jiao Dagong: "What brand of lithography machine is that?"

Li Tianyu laughed, and it was difficult for him to answer for a while, so he couldn't say he was a "non-brand", right?

Li Tianyu: "Let's go and have a look and we'll find out. Mr. Lu should have already made arrangements."

In fact, what Li Tianyu told Lu Hui just now was also about the lithography machine.