I'm rubbing the masked knight in the United States

Chapter 25 Preliminary Contact
In the following week, there was no news of Stark's disappearance from Beetlebug. Edward was afraid to go out because of the black magician's persecution, so he stayed at home and read all the novels, movies, TV series, and animations he had read. The powerful characters are grouped together, even if the black magician sneaks into the dream again, he can also summon Saint Seiya, Ultraman, Transformers, My Little Pony, Doraemon, Calabash Doll, etc. to fight the black magician inhumanely .

He originally wanted to go directly to the New York Temple, even if it is better to lay a shop on the floor somewhere than at home, but at the end of the dream, Gu Yi's sentence "don't come to me" blocked him back.

Edward pinched his fingers, and he just took advantage of this time to become proficient in armor making.

In addition to sleeping during the day, I draw pictures. The general idea of ​​the two forms of Kamen Rider Kato slowly took shape during this week.

The form of Kato is divided into mask form and knight form.

The masked form is a typical "extreme environment combat equipment". It has excellent defensive power. Even a sword made of diamonds can't hurt it. It seems that there are better materials to achieve better defensive effects.

In the knight form, the speed increases, the reaction speed is greatly improved, and the strength is relatively reduced. It can withstand high temperatures from absolute zero to 5000°C.

It has an actual case that falling from a height of 500m will not cause harm to the wearer. Its unique knight kick can cause particle collapse effect from the atomic level-this is very important, because it can directly destroy the enemy's defense .

Of course, the above are all ideal effects. At present, Edward still doesn't know where to start to restore and build the Jiadou series, let alone complete the full copy of the original effect.

on the other hand.

Kamen Rider Kato's data in the Kamen Rider series is not outstanding, but its iconic acceleration skill "Clock Up" gives it a unique speed advantage.

The principle of Clock Up makes the tachyon flow cover the whole body, making oneself and the surroundings in different time flow speeds, and achieves the effect of high-speed movement by accelerating one's own time.

The speed of this state is not fixed, but the upper limit is determined according to the physical fitness and willingness of the transformer.

According to the records of the Time and Space Administration, the normal Jiadou's level generally starts at the speed of sound, and the normal standard is between several times the speed of sound and tens of times the speed of sound, but there is no fixed index. The Clock Up of the strongest Jiadou has reached sub-light speed level……

But in the final analysis, this skill is caused by accelerating the flow of time. If you use it too much, it will lead to rapid aging. Imagine a normal person’s 1s, but you have passed ten minutes, half an hour, once or twice, but more times. , Superimposed to one month or two months, one year or two years is terrifying.

The same is true with Edward's time-stop principle. The world time stops, and the own time remains normal. The superposition of the two will consume a lot of time.

As a member of the Time Management Bureau, Tid naturally has a solution. The only problem is that Edward can't accurately control the time now. Let alone solve it, he is a little afraid that Clock Up may also bring him a reverse flow of time.

The time countercurrent caused by self-stopping and the difference in internal and external time flow caused by the time-stopping caused the rapid aging of the body together by the "Eat Robber" system, but Jiadou's Clock Up is still unknown.

In addition, the data of Clock Up is extremely complicated, so Edward did not rush to enter it.

Because someone was watching, and he was worried about someone breaking in from time to time, Edward's work efficiency was not high. In terms of work, he only selected the simplest [-]% of all work procedures to start designing.

This does not mean that it is enough to draw a good-looking shape. In the design of a part, both internal and external issues must be considered clearly.

Defensiveness must be considered on the exterior of the armor. At this time, it is necessary to determine the thickness and streamline shape of the exterior armor according to the materials used.

The interior of the armor is a more complex "transmission". The basic function of the transmission system is to transmit the power from the engine to the driving wheels of the car to generate driving force.

Applied to the Iron Man armor, it is to transmit the energy of the "Ark Reactor" to various parts of the Iron Man armor to generate driving force so that the armor can operate.

After all, it is made of metal materials, no matter how light it is, it is "132kg" or "95kg". Putting on such a heavy thing is equivalent to pressing a big fat man on a person. It is impossible to say that a person is strong, so he just carried it hard This weight fights.

So the transmission system is very important. If the transmission efficiency is poor, it is equivalent to walking with a big fat man on your back, or fighting with a big fat man on your back!

That would be exhausting!
The internal transmission is one aspect, and the functional design of each part must also be considered, such as heat dissipation, shock absorption function, and some parts have to be stuffed with reinforced protection devices, energy transmission devices, and power explosion devices...

Such functions cannot be added directly by clicking the "Add" button, and related functions require related components.

For example, the operation of such a large system will generate heat. An ordinary computer will have to dissipate heat after a long time of use, let alone an armor?

If you want to dissipate heat, you must have a heat sink, right?

You have to defend against the opponent's attack. It's not just that the armor can resist it. The wearer will also be stressed. If the armor is hard enough, but the shock absorption is not good, it may happen that the armor is fine and the wearer is shocked to death first.

So in order to reduce the force, you have to absorb the shock, right?It has to be a shock-absorbing material, right?
If a part has too many functions, the part will appear bloated, and if it has too few functions, it will become a flaw. Therefore, how to coordinate the proportion of functions must be carefully calculated.

This precise air-to-air adjustment is impossible and must be estimated based on the "materials" used.

Unfortunately, Edward didn't have any materials, so he asked the beetle to find a material library in a small laboratory and copied some materials and data.

For example, the physical and chemical properties of various metals, as well as some experimental data, one counts as copying all of them. Anyway, Edward has nothing now, whether it is useful or not, it is not a loss to take it first.

Then use the beetle's own computing power to compare the possible metal materials one by one to check whether it can be used, and then check if it is used, whether the two metals are suitable together, and whether there will be any negative effects.

Compare them one by one, try to find some metals that meet your needs, and then use the computing power of the beetle to coordinate the calculations...

So many components are crammed together in terms of hardware, and there must be related software to control the situation of each part. These control systems also need to be programmed. The more functions, the more programming is required.

Then you have to set up a backup to avoid bugs. It is best if this backup can be different.

After all, some bugs may be caused by their own problems, so you can replace it with the original version, but if you see Batman injecting a virus into the system, wouldn’t you be courting death if you want to use the original version?
With so many things stuffed together, Edward is a novice, and he is in a hurry.

Edward has been busy for a week, and he has completed a quarter of some of the simplest design parts of the hands and wrists of Kamen Rider Kato-Kamen, and other aspects have been completed piecemeal a little.

Although we have tried our best to compress the sleep time, and the sleep time is less than three hours a day, the current total completion rate is 2.94%.

This 2.94% is 10% of the easiest 2.94% of all difficulties. Normally, Tidd can complete this 10% in two days.

After the final blueprint was taken away by the beetles and burned, Edward rubbed his temples.

After the design drawing and data derivation process is completed, it is input into the beetle, and his handwriting is burned after input.

After all, it is necessary to prevent the black magic, Hydra, and S.H.I.E.L.D. from obtaining these blueprints.

But nothing was left.

Edward left some exceptional paintings, pencil drawings of landscapes and landscapes.

Edward took the time to draw a bunch of landscape paintings of his "hometown" to prove that this hometown is the hometown of Edward in this world - Suzhou and Hangzhou.

Because this was drawn by a young man who lost his memory, the appearance of the West Lake on it is very weird, stumbling; because he is afraid of being caught back, he is trembling all the time, and there is an obvious pause every other period because of fear I will be arrested by myself.

These are still in shape, and various paintings that are not in shape are also prepared. A thick stack is scattered on the table. This is mainly to highlight that Edward's memory is incomplete and he can't even remember his hometown. The pauses and shaking marks in the film reflect Edward's fear of foreign countries and other blah blah blah.

Edward used his strength in reading comprehension to lay out for those who monitored him.

"I'm bored."

Edward gnawed on the compressed biscuits, sorted out some of the results of this week's hard work, rubbed his temples, looked at the peaceful sunshine outside the window, indulged in it for a long time, waited for the reaction, jumped up suddenly, and put on his clothes , and walked out of the house with the beetles.

Stark has not had an accident so far, instead of waiting, it is better to take advantage of this free time to do something.

"!!" Wait, why do I have such an idea?

It’s just right to stay at home and wait for work to face the enemy from afar, and it’s just right to enter the armor data. It’s just right to do more than one action. Why do you have the idea of ​​​​”going out to relax before the enemy comes”?

Edward thought for a while, and the idea of ​​"going out to get some air" came to his mind again.

Someone is interfering with his thoughts!
Edward thought hard for a while, but he didn't think of what method the other side used, and when it interfered with his thoughts. A little annoyed, he took out the amulet, but the amulet didn't respond. Did he not know, or pretended not to know and let it be?

Edward thought for a while, held the amulet in his hand, and recited his thoughts silently.

Why not follow the plan and follow the trend, with Gu Yi behind, maybe you can annihilate the black mage in one fell swoop, and eliminate this worry--the black mage stares at Rumang on his back, making Edward restrained in everything he does, she will not be destroyed, Edward is upset.

Then why not go fishing first, give her a chance, and see if she is tempted or not.

At this moment, a blue light flashed on the amulet.

"can."

(End of this chapter)