Technology dominates

Chapter 22 Huateng No. 1

In order to ensure the safety of the company, Wu Huateng also installed dozens of monitoring probes outside the company, and monitoring equipment was also installed in the corridors and other places inside the company.

Not only that, in Wu Huateng's design drawings, a direct elevator is installed in the living area from the first floor to the fifth floor, thus blocking all the stairs leading to the second and fourth floors.

In this way, the production center on the second floor to the fourth floor can only be accessed through the special elevator from the warehouse area behind the first floor, and the use of the special elevator needs Wu Huateng's approval, and he requires that the company's employees basically do not need to go to these areas.

Not only that, Wu Huateng also installed backup power supply equipment and alarm devices in the company's warehouse area and intermediate production area. At the same time, he also exchanged for a remote control electric shock pen and placed it on the third floor, so that the entire office building can be covered and attacked. Even including the 300 meters outside the building.

Whether it is monitoring equipment or alarm equipment, including backup power supply and remote control electric shock pen, they can all be controlled remotely by Wu Huateng's smart terminal. Even if he is far away abroad, if someone wants to harm the company, he can control the alarm or Electric shock each other.

Half a month later, the company was approved, and the 500 million venture fund was also established. The company chose to open on November 11, which did not disturb more people. Only more than ten new employees recruited by the company, including Wu Hua Three of Teng's roommates were also included, and they set off a few firecrackers at the entrance of the entrepreneurial building, and then unveiled the company's signboard.

However, when the management committee of the park knew about it, it immediately sent over a dozen flower baskets, which also shocked many entrepreneurial college students in the business park and attracted countless people to watch.

"My God, there are college students starting a business."

"Huateng Technology Company, oh I see, it must be the company founded by Wu Huateng of our Jiangnan University of Science and Technology."

"Is it the student from Jiangnan University of Science and Technology who invented 12 patented technologies?"

"This is the real entrepreneurship. I heard that he received 500 million entrepreneurship funds from the Jiangnan City Government. This is really awesome."

"Oh, if only I had such beauty, I don't know how many beauties will fall in my arms."

Many onlookers, college students and entrepreneurs were discussing, and some asked loudly whether Huateng Technology Company would recruit employees, but Huateng’s current employees, in addition to Wu Huateng’s roommates and classmates, and several classmates of Qin Yuting, Ma Xiaosu Some of my classmates have not recruited people outside for the time being.

For these people, Wu Huateng promised a salary of [-] yuan per person in the first month, and the subsequent salary will depend on the benefits of the first month. However, for everyone, salary is second, and life experience is the most important. , after all, they have not yet graduated.

Wu Huateng started to get busy. A few days ago, Hantang Company owed Huateng Technology Company a batch of raw materials and parts worth 500 million in advance, and Huateng Technology Company promised to produce a combined machine tool for them within one month. Thus establishing a business relationship.

Wu Huateng transported his combined machine tool from the school warehouse to the company, and started his own production with this combined machine tool. However, at the beginning, he did not produce products for export, but a machine tool.

That's right, Wu Huateng first wanted to manufacture a machine tool, and it was not an ordinary machine tool, but a set of high-speed and high-precision CNC machining centers.It refers to a CNC machine tool that is equipped with a tool magazine, has an automatic tool change function, and performs multi-process processing after the workpiece is clamped once.

The machining center is a highly mechatronic product. After the workpiece is clamped, the CNC system can control the machine tool to automatically select and replace tools according to different procedures, automatically set the tool, and automatically change the spindle speed and feed rate. It can continuously complete drilling, boring, Milling, reaming, tapping and other processes.

Therefore, it greatly reduces the time for workpiece clamping, auxiliary process time such as measurement and machine tool adjustment, and has a good economic effect on parts with complex machining shapes, high precision requirements, and frequent variety replacement.

Machining centers are usually classified according to the relative position of the main shaft and the worktable, and are divided into horizontal, vertical and universal machining centers, and Wu Huateng is going to manufacture a universal machining center.

Universal machining center, also known as multi-axis linkage machining center, refers to a machining center that can control the linkage change through the angle of the axis of the machining spindle and the axis of rotation of the worktable to complete the machining of complex spatial surfaces. It is suitable for impeller rotors with complex spatial surfaces, Processing of workpieces such as molds and cutting tools.

Machining centers can be divided into ordinary grades and precision grades according to their precision grades, including geometric precision and working precision.There are generally more than 30 inspection items, and the details, inspection conditions and methods are clearly stipulated in the standard.

The overall acceptance of a machining center is relatively complicated. Generally, it is necessary to use large-scale high-precision instruments such as laser interferometers and three-coordinate measuring machines. Run the performance detection test, and finally get the comprehensive technical evaluation of the aircraft.

Since it is not the old material that is used, but various parts of specified size, Wu Huateng does not have much trouble in processing. The most important thing is to process each part into an exact size.

Wu Huateng exchanged 100 technology points for an intelligent processing robot. With the help of the robot, it took only ten days to polish more than 3 large and small parts, and then only three days to complete the production of the working machine. Installation and debugging.

When the time scale turned to December 12st, the historic moment finally arrived. In this small business park in Jiangnan City, without anyone witnessing it, the working machine of the era of the world's great technological leap was born quietly.

"Master, the multi-functional high-speed and high-precision CNC machining center has been debugged. All functions are normal. The precision reaches 0.5 wires. It can be operated continuously for 7200 hours. It is locked by the smart terminal and only the owner can use it."

When the angel finished debugging the multifunctional CNC machining center made by Wu Huateng, Wu Huateng finally breathed a sigh of relief. He manufactured the first 7-dimensional multifunctional CNC machine tool on the earth, and thoroughly mastered the manufacturing of various high-precision CNC machining centers. machine tool capabilities.

"Name it Huateng No. 1." After the master identification process of the mother machine was completed, Wu Huateng gave it a name and called it Huateng No. 1, which represented its important position in Huateng Technology Company.

If Wu Huateng now takes out the Huateng No. 1 mother machine to apply for a patent, it will definitely cause a sensation in the whole world, detonate the global science and technology field, and cause shocks in all countries, because it has at least hundreds of patented technologies that are 30 years ahead of the earth's technology.

"Hahaha, Huateng Technology will take off from today." Wu Huateng laughed in the production workshop, but no one could share this joyful moment.

　PS: According to the suggestions of some book friends, the beginning of this book has been revised, but it will not affect the later reading. If you have time, you can also read the first two chapters again.

　　
　
(End of this chapter)