Warhammer: The Time Traveler

Chapter 83 The Delivery Servant (Fourteenth Update)
Deep within the abandoned town's workshops, the air felt exceptionally heavy due to the highly concentrated energy.

Chen Yu's dark red body stood before the dimensional teleporter, which had undergone multiple iterations and optimizations.

His crimson optical lens scanned continuously at a frequency far exceeding human vision, locking onto the central energy focal area, where the eerie light was rhythmically distorted and flickering with the precise injection of energy, exhibiting a controlled, unstable state.

Previous experiments have successfully verified the feasibility of transmitting information and small-mass samples, but have always been limited by energy supply and resonance accuracy, failing to open a stable gap large enough for a material unit with engineering practicality to pass through.

The upper limit of energy output, the slight deviation between the resonant frequency and the local physical rules, and the high energy consumption required to maintain channel stability are technical obstacles that must be addressed one by one.

By conducting near-exhaustive deductions and simulations on the massive amount of accumulated experimental data, Chen Yu constructed several highly realistic energy-space models.

He clearly realized that to achieve the next breakthrough, he had to execute a precisely calculated injection protocol that would significantly increase the energy level.

He has thoroughly calculated the relevant data and established a data model to calculate various possibilities.

All potential risks, including energy loop overload thresholds, spatial structure tolerance limits, and energy dissipation paths in case of failure, have been repeatedly calculated in his model and equipped with corresponding buffers and safety mechanisms.

"Execute the energy injection protocol." Chen Yu's synthesized voice rang out in the workshop, steady and firm, without any hesitation.

His massive mechanical body established a deeper physical connection with the transmission control core, and several specially made thick energy-conducting cables extended from the dedicated interface on his back, closely connecting with the key nodes of the main control console.

This allows him to directly regulate the impending energy surge with higher authority and finer control granularity.

The moment the command was issued, the auxiliary lighting system in the workshop automatically dimmed, prioritizing power supply to the core equipment.

The energy conduits embedded in the walls and floor emit a steady, continuous hum that gradually increases in frequency and intensity.

The increasingly dense, azure energy flow, visible to the naked eye, surged and converged along the enhanced path, like a precisely guided torrent, and was efficiently channeled into the expanded and reinforced core energy pool in the base of the teleporter.

The multi-layered ring structure at the center of the transmitter began to rotate synchronously at a speed far exceeding that of the past, and the precisely calibrated motion trajectory left afterimages in the air.

The geometric symbols suspended within the ring were excited by abundant energy, their brightness and complexity increasing dramatically, emitting a high-frequency but not harsh whistling sound—the inherent physical sound of energy operating efficiently.

In the air, the smell of ozone and heated metal becomes more pronounced, which is a normal phenomenon in high-energy environments.

In the floating interface to the side of Chen Yu's field of vision, the waterfall-like refresh of data streams and dynamic model displays show that the energy readings are steadily rising along the preset optimal curve, precisely matching the theoretical trajectory.

Several key parameters, such as spatial curvature tension, local energy density, and background radiation level, have entered a high-load operating range that has never been reached before, but all values ​​are still strictly controlled within the verified safety boundaries.

The system feedback closely matched his model predictions, indicating that the entire process remained under his precise control.

"The core energy field stability remains at 73 percent of the threshold. Local spatial curvature fluctuations exceed the baseline model by 15 percent, which is within the prediction range of Plan B." The servo skull reported the real-time data in a monotonous electronic voice.

These fluctuations did not surprise Chen Yu; they fell entirely within the various scenario models he had pre-analyzed. His core logic was operating at high load, not to handle unexpected situations, but to execute a fine-tuning task requiring extreme precision.

Based on real-time feedback, he fine-tunes the frequency and phase of the energy output at millisecond speeds, like an experienced operator continuously adjusting control parameters in known turbulence to counteract and utilize the inherent, partially known regularity of the space structure's "rejection" effect.

The whole process is more like a high-intensity interaction with a set of known and powerful physical laws, with pre-set steps.

"Execute the final stage instructions."

His synthesized voice remained steady. After the command was issued, a set of specially encrypted coordinates and authentication signals, along with a precisely modulated and highly condensed energy pulse, were synchronously and accurately injected into the core of the transmitter.

In an instant, the brightness in the center of the workshop increased dramatically, to the point that it was difficult to look directly at with the naked eye.

A deep blue rift, its edges shimmering with complex geometric patterns and its shape gradually stabilizing through constant self-adjustment, gradually emerged, supported by a powerful energy field.

It is not a violently torn gap, but rather an abnormal area temporarily "woven" in the structure of reality, with the flow of light and shadow inside reflecting dimensional characteristics and energy paths that are difficult for ordinary people to understand.

The size of the crack fluctuated as expected in the initial stage, which is a normal transient process before energy and space reach a new balance. However, under Chen Yu's continuous control, it quickly converged and stabilized into a clearly defined elliptical shape that could accommodate an adult human.

The channel was successfully established.

A temporary cross-dimensional interface with actual material transport capabilities has been formed under his complete control, as per the predetermined objectives.

Almost at the same moment the rift stabilized, a figure stepped out from the chaotic light and shadow.

Emerging from the surging energy rift, the machine servants, whose standard humanoid silhouettes appeared unusually bulky due to the various devices they carried and were equipped with.

Several metal boxes of unknown structure were fixed to the torso and limbs, with wiring and reinforcement supports interspersed. The most conspicuous thing was a cylindrical device of considerable size mounted on its back—which was clearly a small plasma reactor.

These extra weights make its originally smooth lines clumsy, giving it a heavy, mechanical feel when moving.

The moment the machine stepped onto the workshop floor, its single-lens sensor on its head quickly locked onto Chen Yu and emitted a monotonous, synthesized voice with static noise: "Command confirmed. Transport unit - Zeta-7, mission sequence completed. Cargo status: Pending inspection."

Once the voice message ends, it becomes completely still and enters a standby state, like a package marked "delivered".

Chen Yu did not delay for a moment.

His attention was completely bypassed by the successfully opened rift itself, focusing directly on the newly arrived metal body, laden with supplies. To him, what it contained was far more important than the success of this technological verification.

"Begin unloading." He gave the order, and several mechanical tentacles equipped with different tools stretched out from all over the workshop, like autonomous control arms, precisely surrounding the stationary machine servant.

(End of this chapter)