Superbase Evolution

Chapter 418: Sanjing Sword Technique

When Lin Shen swung the hammer dozens of times, Lao Dao was a little surprised: "This kid's endurance and skill durability are really extraordinary."

"The material doesn't seem to be hot enough. I can't smash it anymore." Lin Shen stopped. Lao Dao thought he couldn't hold on any longer, but who knew Lin Shen would say this.

Lao Dao was so busy watching Lin Shen swinging the hammer that he didn't notice that the metal material was no longer very red. The temperature had dropped too much and it was no longer difficult to smash.

The piece of material was smashed into uneven pieces by Lin Shen, so it probably needs to be sent back to the furnace for remaking.

"Not bad, really not bad, but you are swinging the hammer wrong, you have to swing it like this." Lao Dao took the hammer and clamped a piece of red-hot metal to demonstrate to Lin Shen how to swing it, how to exert force, and how to control the strength and accuracy.

Lin Shen tried several times but could never grasp the key points.

Although Lao Dao had a hot temper, he did not lose his temper. Instead, he was very patient and let Lin Shen continue trying.

Of course, it wasn’t because Lao Dao’s temper suddenly improved, but because he discovered that Lin Shen’s endurance was stronger than he had imagined.

Lao Dao is not blind, of course he can see that the shell on Lin Shen's body has been maintained in that skill state, and the skill has never stopped until now. It has been such a long time.

A skill like this that has a strong effect on strength, if it can be used all the time, the consumption itself must be very huge, not everyone can use this skill all the time.

For similar skills, Lao Dao himself could not keep them activated all the time when he was upgrading like Lin Shen did.

Besides, Lin Shen's strength is really amazing. Even if a top-level ten-turn ascender activates the skill of doubling strength, he is probably not as strong as him, nor can he have the same endurance as him.

Although Lin Shen was always making mistakes, he was able to keep swinging the hammer, which was already quite impressive.

It was precisely because of Lin Shen's abnormal behavior that Lao Dao had the patience to wait for him to correct his mistakes. If it were someone else, Lao Dao would have lost his patience long ago.

Lin Shen tried for a long time but still couldn't get it right. When he swung the hammer again, an idea suddenly came to Lin Shen's mind.

"Swinging the hammer like this seems a bit similar to the way a fisherman swings his rod!" Lin Shen's mind moved, and he tried to swing the hammer using the same technique as swinging the rod, regardless of how Lao Dao taught him.

This test produced surprising results, and the ability to control the sledgehammer was clearly elevated to a higher level.

Lin Shen tried this method several times, and each time he tried it became more and more skillful and he controlled it better and better.

Lao Dao stared at Lin Shen in astonishment. The way Lin Shen swung the hammer looked weird no matter how you looked at it, but he swung it more and more accurately, and his control was getting better and better.

Lao Dao originally wanted to correct him, but after correcting him once, he found that Lin Shen's accuracy and control had become very poor, so he could only let him continue to return to that weird way of swinging the hammer.

"I've been a blacksmith for half my life, and I've seen many people swinging hammers, but you're the first one who swings a hammer like this." Lao Dao said with a strange look on his face.

Lin Shen's way of swinging the hammer is obviously more difficult and harder to control than the way he taught. The key is that it looks a bit strenuous, but Lin Shen's control is getting better and better.

Seeing this situation, Lao Dao didn't care about anything else. As long as Lin Shen could meet his requirements, he could swing his sword however he wanted.

Lao Dao was quite satisfied with Lin Shen's endurance, which even far exceeded his expectations.

Lin Shen was like a machine that never got tired. As long as Lao Dao needed him to, he would keep hammering. Lao Dao saw that Lin Shen's accuracy and control were almost there, so he taught him how to cooperate.

He took a small hammer, and Lin Shen would hammer wherever his small hammer hit. Moreover, Lin Shen was also able to judge how much force the big hammer should use to hit down based on the speed and force of the small hammer falling.

Lin Shen learned very quickly this time and was able to cooperate normally with Lao Dao in a short while.

Lao Dao took Lin Shen to forge swords together, and occasionally he would give Lin Shen advice on why he should forge swords in a certain way, why he should forge swords in a certain way, and issues such as the temperature.

It’s not that he wanted to teach Lin Shen, but Lin Shen didn’t understand these words, and sometimes it was difficult for him to comprehend his intentions. If the force and angle of the hammer were not right, his work would have flaws.

Lin Shen is quite interested in sword forging. Although he is not really obsessed with it, he is still happy to learn some knowledge.

For several days, Lin Shen worked as a laborer in the cave, swinging a sledgehammer to help Lao Dao forge materials.

Lin Shen's endurance surprised Lao Dao more and more. He seemed to be never tired. Sometimes Lao Dao himself felt a little tired, but seeing that Lin Shen was still so vigorous, Lao Dao once came to the unsure conclusion that he was old.

"Is this guy a machine in human skin?" Seeing that Lin Shen was so powerful, which was beyond the imagination of normal humans, Lao Dao taught Lin Shen how to stack materials.

When he was resting, he let Lin Shen stack the materials for him.

At the beginning, Lin Shen naturally wasted a lot of materials. Fortunately, Lao Dao didn't care about this problem. He originally wanted Lin Shen to practice with the recycled materials. At worst, he could just recycle them again.

There are two kinds of materials in the furnace, one is the new material refined, and the other is the scrap material returned to the furnace for remaking.

Most of the time, old knives are made with recycled materials for experimental attempts. Only after new inspiration and successful experience are new materials tried.

But in the end all the materials became waste. Lao Dao was cursing all day long, but he didn't curse people, he only cursed the waste knives. This was probably his only advantage.

After a long time, Lin Shen finally understood why those knives that the old knife master considered to be scrap were kept and not recycled.

The main reason is that the remaining knives all have some successful inspirations and advantages. Although they are waste, they still have some reference value, so the old knife did not remake them.

When he had nothing to do, Lin Shen tried playing with a few broken knives, but he found that those knives were much heavier than the sledgehammer he used. In the super basic form, it was very difficult to swing them.

"These waste products are tangible but not spiritual. They are just garbage." Lao Dao said indifferently.

"What constitutes your ideal knife?" Lin Shen asked curiously.

"Have you ever heard of the Sanjing sword technique?" When Lao Dao asked this question, his back was straight and there seemed to be a slight pride on his face.

Seeing his expression, Lin Shen wanted to tell him that he had heard of it, but he really hadn't, so he could only shake his head and said, "I have only been out of my home planet for a short time, and I know very little about the top techniques in the universe."

Lao Dao's face showed disappointment. He said calmly, "It's normal that you haven't heard of it. Not many people know this sword technique now. The so-called Three Respects means one is to respect the gods and ghosts of all directions, two is to respect the demons and Buddhas of all heavens, and three is to respect all things in heaven and earth. One sword cuts the gods and ghosts, two swords cut the demons and Buddhas, and three swords cut all things. There is nothing in the world that cannot be cut. Respect first and then cut. This is etiquette. This is the Three Respects sword technique."

(End of this chapter)