Soldier's Assault: Rebirth of the Fifth Squad Leader on the Grassland

Chapter 634 Could it be that it is to be modified into an integrated surveillance and combat unit...

When Ma Zhi first came up with the idea of ​​a car-mounted video digital phone, he had already considered it. However, among the available components on the digital phone, the first thing he excluded was the built-in camera.

As long as it is modified, it can be used as a target drone for drones. Although this target drone is already very large and has a strong load capacity, Ma Zhi decided to reduce the weight and volume as much as possible during the modification.

First of all, Ma Zhi decided to maintain the integrity of the original target drone shell as much as possible. Since he wanted to maintain its integrity, what needed to be added could only be installed inside the target drone.

To install it inside the target machine, the first thing to consider is the volume of the additional items. If the volume is too large, the utilization of the internal space of the platinum will definitely be reduced. If the volume is small, the loadability will be stronger. too much.

As for attaching modified parts to the outside of the target drone, it's not that Ma Zhi never thought about it. He did think about it. He decided to use it like that only when he had no choice but to do so.

After all, all aspects of the performance of the target drone are affected by external accessories. When external modifications are reduced, the performance of the target drone will naturally maintain its original parameters.

As for external accessories, the impact on the body is multi-faceted. If there is no problem, it is fine. If there is a problem, it will definitely be very laborious to adjust and modify it.

Ma Zhi didn't want to waste any more time, so he decided to just do the trouble-free method first, which was small modifications.

As for the camera, this accessory is easy to buy and can be purchased with smaller size, better quality and higher pixels. Therefore, Ma Zhi spent a little money and bought a set directly.

That’s right, it’s a set, not just one. Even the camera is bought together with accessories, such as cables.

Considering that the camera cannot only be fixed in one direction, Ma Zhi also bought a remote control car, which mainly uses the control board and motor of the remote control car, mainly to control the additional camera.

Once the things were in place, Ma Zhi began to dismantle them.But for the main unit of the imaging digital phone, it is impossible for him to install the entire main unit on the target machine. As mentioned earlier, small-sized modification parts are required. After the main unit is plugged in, you only need to use the control motherboard and some circuit modifications. .

It didn't take much effort to fold, but when Ma Zhi disassembled it, his movements were still very light. After disassembling, he only threw away the external plastic parts. As for the internal host and circuits, they remained intact. , and then start the internal installation of the optical target machine.

In order to maintain internal compatibility, Ma Zhi also specially made a hot-melt gun and welded it directly inside the target machine. It was fixed with hot-melt glue and could reduce vibration while being relatively strong.

After the main board was installed in place, Ma Zhi started the detailed work, which was to install the camera. This was a bit laborious because the camera needed to be installed on the outer protective piece of the lower part of the target drone.

Ma Zhiqiang picked up the outbound call piece at the bottom of the phone, and then compared the top of the phone to determine the location of the main board of the video phone before starting to drill holes on it.

Then, on the inner side of the outbound call piece, the remote control motherboard was installed, and then the motor was installed. Finally, the camera was installed on the double motors at right angles.

The reason why Ma Zhi used dual motors was to test the camera below. In addition to being able to rotate 120 degrees up and down, it can also rotate 45 degrees left and right.

This adjustment angle was also determined by Ma Zhi after many thoughts. If the adjustable angle is too large, it may encounter and squeeze out the outer protective parts of the machine.Moreover, this adjustment angle is very sufficient, which is better than not having a fixed angle.

In the end, the camera took Ma Zhi some time, because the cable arrangement was different from the original connection cables for visual and digital phones, mainly because of the different connectors. Ma Zhi had to spend some energy to connect them one by one. Pick up.

Because the cable is very thin, you have to be very careful when connecting it. Fortunately, it was connected. Although it was not a smooth connection, it was not broken at all.

After such modifications were completed, Ma Zhicai began to install the outer protective parts of the target drone, that is, the shell. Reinstalling the outbound call button was easier than disassembling it before, and it was even easier than modifying it.

But even so, Ma Zhi still has to be very careful when installing. After all, after the modified parts are installed, whether the internal space will be affected cannot just be determined by what he measured with a ruler.

Fortunately, Ma Zhi's installation was relatively successful, and there was no extra space inside. The installation of the outer shell parts was not affected by the internal modifications.

As soon as the shell was installed, the railway waiting next to him seemed even more excited than Ma Zhi. At this time, he was not afraid of affecting Ma Zhi anymore, so he came up and asked Ma Zhi directly.

"Now that it's installed, can we get it out and try it?"

According to normal development, after the modification is completed, it must be taken out to test the performance first, but Ma Zhi shook his head and said: "Captain, the test cannot be done now. By the way, what time is it now, is it time to eat. "

Ma Zhi didn't feel anything during the modification. After the modification was completed, Ma Zhi immediately felt hungry. He didn't know how long the subsequent subtle modifications took.

Yuan Lang said: "It's time to eat, it's almost dark now."

Ma Zhi responded: "I said why are you so hungry? It turns out that it's already getting dark and you haven't eaten lunch. You must be hungry. Captain, why didn't you remind me when it was time for lunch? Aren't you afraid that I would go out hungry? Come anyway."

Railway said: "I wanted to remind you, but I was afraid that you would blame me for affecting you, so I stayed with you and waited for you, thinking that when you finish it, or you cry out that you are hungry, I will be there Let me tell you, by the way, why can’t we test it now?”

Ma Zhidao: "What else could be the reason? The modification hasn't been completed yet. Okay, let's not talk about this for now. Let's go eat first. I'm really hungry now and can't stand it anymore. I think I won't eat more." If you do, you won’t have the energy to carry out subsequent modifications later.”

Railway turned around and glanced at the target drone that had been reinstalled as it was before, and couldn't help but ask Ma Zhi: "This hasn't been modified yet. Are you planning to install another machine gun on it and modify it into the one you mentioned before? Isn’t it possible to use an integrated surveillance and combat drone?”

Naturally, the railway also thought of Ma Zhi. What he had told him before was that there are various types of drones, including surveillance and attack drones, which are drones with corresponding firepower. If Ma Zhi really should come up with such a guy, then the railway Of course I am willing, after all, that thing is more useful.

Ma Zhidao: "I would like to, but it's not possible now. Haven't I finished the modification? So let me give it a try. Now let's go have a meal first. After the meal, then..."

(End of this chapter)