Start with the aviation industry

Chapter 263

He Hua gave Lin Feng the list, which contained a total of ten names after selection.

The transport helicopter already has its own name, but this heavy gunship has never had a name for it!

Therefore, a month ago, the Leihuo Technology Industry Group also launched a name-calling campaign for this heavy-duty armed helicopter. After the announcement was published in the Huaxia Aviation Industry News, a large number of letters were sent over.

Once the name is adopted, not only will there be a cash reward of 1000 yuan, but also great glory. This is the world's top heavy-duty armed helicopter.

A large number of letters were mailed over like a snowflake. After careful selection, these ten names were finally sent to Lin Feng's desk.

Picking up this list, Lin Feng looked at it seriously, and his eyes quickly locked on one of the names.

"Mr. He, I think this name is good. Our transport helicopter is code-named Tianlong, so our heavy-duty armed helicopter is code-named Veyron."

"I think it's a good name, what do you think?"

He Hua immediately said, "We are also very optimistic about this name, and think that our heavy armed helicopter is called Veyron, which is indeed very appropriate."

Lin Feng decided, "From today onwards, our heavy-duty armed helicopter will be officially called Veyron, and an announcement will be published in the Huaxia Aviation Industry News to inform everyone in the domestic aviation industry."

"Okay, I'll handle it right away." He Hua replied.

His efficiency was very high, and the announcement was published in the Huaxia Aviation Industry News the next day. From this moment on, everyone knew that this heavy-duty armed helicopter was called the Veyron.

Many people in the domestic aviation industry are also discussing this matter, and many people are happy that this armed helicopter has an official name.

Because this heavy-duty gunship is the ceiling among the world's gunships, everyone knows that its performance is very good. Even the 001 prototype has not yet been manufactured, but it has won many fans.

Such as Phoenix Factory, workshop 406.

This used to be the place where Lin Feng worked. Whenever there is any movement in Leihuo Technology Industrial Group, it always attracts the attention of the employees in Workshop 406, especially the craft technicians.

On the big table in the office is today's Huaxia Aviation News, and several young craftsmen are happily discussing the naming of this heavy-duty armed helicopter.

"From today onwards, this helicopter will be called the Veyron!"

"I'm really happy for this gunship, he finally has his own name."

"The transport helicopter is called Tianlong, and the armed helicopter is called Veyron. I think these two names are very good."

"I declare that starting today, I am a complete fan of this gunship."

"..."

Discussions like this not only happened in workshop 406, but also in the entire Phoenix factory, and many people in other departments or other workshops were talking about it.

Of course, within the past few days, Lin Feng also received several congratulatory calls one after another.

Everyone congratulated Lin Feng, this heavy armed helicopter finally had a famous name.

Xie Kangquan not only called to congratulate, but also expressed his own opinion. He likes this name very much.

In addition, he further inquired about the production status of the first prototype of this armed helicopter.

Lin Feng told him very confidently that the 001 prototype should enter the final assembly in February or March.

This made Xie Kangquan very happy, he expressed his joy unabashedly, and told Lin Feng clearly that he would report this gratifying progress to his superiors immediately.

When he made this call, he not only congratulated Lin Feng, but also told Lin Feng that the relevant technical information about the two advanced turbofan engines that he needed would be faxed within a day or two.

Sure enough, these documents were faxed the next afternoon, a total of more than ten pages, not only the basic parameters of these two turbofan engines, but also the main performance introduction, and even their respective design features, which advanced design technologies were adopted. etc.

This is much more detailed than what Lin Feng found on the relevant information.

Sitting in his office chair, Lin Feng carefully read the dozen or so pages of technical information.

After reading it, I basically have a bottom line in my heart.

It is very clear in my mind what the first medium and small bypass ratio turbofan engine of Leihuo Technology Industrial Group will look like in the future, and it has already had a preliminary prototype.

Since the turbofan engine is to be developed, it must be the most advanced in the world, with the highest technical content, and the overall performance must fully surpass the F119 engine.

If Xie Kangquan and others knew that the next turbofan engine of Leihuo Technology Industry Group would surpass F119 in an all-round way, they would definitely be dizzy with happiness.

China does not dare to expect world-class, should be said to be world-class, medium and small bypass ratio turbofan engines.

As long as any domestic company can produce a world-class turbofan engine, everyone will be extremely happy and elated.

As for surpassing the F119, I dare not even think about it. Everyone knows that this should be the ceiling of the military turbofan engine.

It basically represents the highest level of medium and small bypass ratio turbofan engines in the world today, and it is also the power of the American F22 stealth fighter.

Lin Feng also knew this, so he didn't tell Xie Kangquan and others that he would build the world's top engine if he wanted to, but only said that the overall performance was close to that of the F119 turbofan engine.

That's what it says, but it's definitely not the case in practice.

I am a systematic person, if the engine produced is worse than F119, Lin Feng feels that he can't afford to lose this person.

After reading the dozen or so pages of technical information, Lin Feng picked up a blank piece of paper, and took a pen to write on it the basic parameters of the engine in his mind.

First of all, the thrust must be greater than that of the F119, at least above 150KN, and the thrust-to-weight ratio exceeds ten, and it is even better if it can reach more than twelve.

Reliability, safety, and service life, etc., must exceed the F119 turbofan engine.

And it must have good universal performance, that is to say, it can be used as power for many future military aircraft.

If the J-20 engine currently being developed can use it, the future J-[-] can also use it as power, and even if Leihuo Technology and Industry Group designs and develops new military aircraft in the future, it can also use this engine as power.

The difference is that some aircraft are powered by one such engine, others can use two, and still others can use four or six.

Lin Feng took this blank paper and wrote down all the main parameters of this turbofan engine that he wanted.

Then start contacting the system.

After a lot of bargaining, the system was completely compromised, and it was still only paid once. It helped Lin Feng design and develop this world-class turbofan engine with a medium and small bypass ratio.

All of a sudden, Lin Feng had a complete set of design drawings and detailed process information for this engine in his mind.

After a while, Lin Feng digested and understood these design drawings and technical materials, which is the power of the system.

It seemed that these things were not forcefully poured in, but designed and developed by Lin Feng himself.

What made Lin Feng even a little excited was not how well designed this engine was, but that there were several new materials in these technical documents.

The smelting process of these new materials is very detailed, basically reaching the level that all you need to find a smelter with certain strength in China can smelt these materials.

There is such a saying in the aviation industry.

A generation of materials, a generation of aero engines.

The emergence of new materials often means the emergence of new aero-engines with better performance.

Among these several new materials is the Ai-Ti alloy that many aviation industry enterprises dream of.

This new type of metal material is only mastered by the beautiful country, but there is still a big gap between the new metal material they master and the aluminum-titanium alloy provided by the system.

In the face of the aluminum-titanium alloy provided by the system, the aluminum-titanium alloy material mastered by Pretty Country can only be regarded as a semi-finished product, or immature.

Because their aluminum-titanium alloys are very demanding on the environment, above a certain temperature, the strength of the material will drop sharply.

The aluminum-titanium alloy material provided by the system basically does not have this problem, and its adaptable temperature is much wider than that of the aluminum-titanium alloy material in the beautiful country.

This is a huge gain.

If the Leihuo Technology Industry Group has mastered the related technology of this aluminum-titanium alloy material, it is estimated that many enterprises and even countries will be jealous.

This turbofan engine system has been designed and comes with several new metal materials.

Lin Feng thought in his heart, since I have a complete set of design materials and process materials in my mind, I should personally write out the design technical outline of this engine.

With so much information in his mind, it was basically not difficult for Lin Feng to write the design technical outline of this engine, and it only took a little time at most.

If this task is entrusted to Leihuo Aviation Engine Design Institute, it will be conservatively estimated that it will take at least one or two months.

Perhaps, one or two months is not enough, because this is the top turbofan engine in the world, and it is very difficult for them to compile such a design technical outline.

That being the case, Lin Feng will do it himself.

In just a few days, Lin Feng wrote out the entire design technical outline, which was dozens of pages long.

I checked it myself, and felt that there was no problem at all, and it was basically the same as the design technical outline in my mind, so I printed it out and bound it into a book, and temporarily put it in my drawer.

The next thing to do may not be the design and development of this turbofan engine, but the site selection and construction of a corresponding aero-engine manufacturing plant.

The Phoenix Manufacturing Plant under the current Leihuo Aero Engine Company mainly specializes in the production and manufacture of turboshaft engines.

Lin Feng does not plan to put turbofan engine manufacturing here, and he has a specialization in technology, which he still knows.

If you want to do your own professional work, this factory specializes in manufacturing turboshaft engines. Anyway, the funds are very strong, and another large factory will be built to specialize in manufacturing turbofan engines in the future.

There is no doubt that if this factory is completed, it will be the most famous turbofan engine manufacturing plant in the world.

Where is this factory built?
Lin Feng already has his own plan, which is to build in the window city of reform and opening up—Shenhai City.

This city will develop into an international metropolis in the future, with a population of more than 2000 million, highly developed, and able to attract a large number of talents.

The production and manufacture of advanced turbofan engines requires a large number of talents.

Another point is that the current land price in Shenhai City is not expensive, and in Lin Feng's view, it is even very cheap.

In another 20 to [-] years, the land price in this city will increase by at least [-] times.

Then occupy a piece of land there now, as large as possible, and use it to build its own turbofan engine manufacturing plant.

She had arranged related tasks with Ding Haixia before, and she found a total of three industrial lands, the smallest with an area of ​​more than 1000 mu, and the largest with an area of ​​nearly 2 mu.

To build a specialized turbofan engine manufacturing plant, more than 1000 mu is enough, but because the land is cheap, it is also possible to occupy more than 2000 mu of land first.

Lin Feng called Ding Haixia over, and Feng ordered, "Book a few tickets to Shenhai City, and let's take a look at the land."

Ding Haixia said with a little surprise, "Boss, you have finally thought it through and are planning to build a factory in Shenhai City."

Lin Feng also made no secrets, "Yes, I plan to build our second aero-engine manufacturing plant in Shenhai City, and specialize in the production of turbofan engines in the future."

It's not that Ding Haixia doesn't understand anything. She deeply knows that turbofan engines are in the greatest demand among all aero engines and have the highest technical content.

So, she showed unabashed joy on her face, "Okay, boss, I'll book a ticket right away. Who will be going to Shenhai City together?"

Lin Feng thought for a while and said the names of several people. Then, Ding Haixia happily booked a ticket to Shenhai City.

.........

Zhu Zhiwen is the chief designer of a new domestic fighter jet.

This is an all-weather, multi-functional, supersonic third-generation light fighter.

The design work has been basically completed, and the production of the first prototype will start next year according to the original plan, but Zhu Zhiwen is a little worried.

Because there is no corresponding aero engine in the country, the motive force of this new fighter can only use Russian-made engines.

This is really helpless.

Fortunately, Russia agreed to export this kind of engine, but the price is not cheap and there are too many restrictions.

Zhu Zhiwen thought more than once that instead of importing their original engines at a high price, it would be better to buy the whole set of technical materials.

Soon he realized that he was a little overthinking. After contacting the Russian side to reveal this aspect, they flatly refused.

Because this engine is also a world-class turbofan engine, you can buy their finished products, but if you want a full set of technical information, there is no door.

Not long after he returned to China, he was sitting in his office thinking about this matter again. The more he thought about it, the more worried he became.

Do you want to carry out surveying and mapping imitation on the basis of this engine...

Since it is not feasible to introduce a full set of technical data for this engine, it is also a way to try to imitate it by surveying and mapping.

It is not the first time that surveying and mapping imitation has been done in China. At present, many domestic engines are surveyed and mapped on the basis of foreign engines, and then manufactured.

After this idea popped up in his mind, he thought he could give it a try.

So, he ran to the capital, but soon became disappointed, because the above did not approve of surveying and mapping imitation.

On the one hand, even if there are ready-made engines for surveying and mapping, the technical difficulty is still very high.

Many experts believe that even if this engine is placed in front of us and it is disassembled into parts one by one, it is still impossible to imitate it.

Maybe it took a lot of manpower and material resources to finally manufacture the engine, but there may be various problems, such as life expectancy, reliability and so on.

This is not without precedent. At present, a certain engine in China is imitated by surveying and mapping on the basis of a Russian-made engine. Although it is successful, there are many problems, and the engine is basically useless.

After returning from the capital, Zhu Zhiwen was in a bad mood. He couldn't carry out surveying and mapping imitation, and he couldn't introduce a whole set of technology, so he could only honestly buy other people's finished engines at a high price.

He even thought in the worst direction, what if someone restricts sales?That is to say, the number of engines sold to you is limited every year, which will inevitably affect the future output of this new fighter jet.

.........

Lin Feng and his party arrived in Shenhai City, and then conducted field inspections non-stop. There are a total of three industrial lands, all of which are relatively large.

Lin Feng personally went to each piece of industrial land, inspected it, and finally decided to buy the one with the largest area.

The terrain of this land is relatively square, with an area of ​​more than 2800 mu, which is enough to build its own turbofan engine manufacturing plant.

The location is also relatively good, not in the urban area, but near the edge.

In the mid-to-early 90s, there were still many places in Shenhai City that had not been developed, and there were still suburbs. This is one of those places.

Why do you plan to choose your own turbofan engine manufacturing plant in a slightly off-center place instead of in the central city.

Because the engine needs to be tested after it is manufactured, and the noise of the test run is relatively loud, it is obviously not appropriate to choose a central city.

After actually inspecting this 800-mu industrial land, Lin Feng said, "This land is good, but the price needs to be discussed further."

Even if Leihuo Technology Industrial Group is very rich, even if you look at it from the current point of view, the price of this land is not expensive, but it is a little less.

.........

Maybe only [-] words can be updated today.

(End of this chapter)